Research coverage
Published articles in this view by region and segment. These counts are editorial output, not market activity.
After Unloading Bulk Cargo: A Decision Tree for Hold Washwater
A practical sequence for deciding what happens to bulk-cargo remnants before and after hold washing: recover what can be unloaded, check the cargo declaration and cleaning product, distinguish ordinary waters from special areas, and record the eventual disposal.
A Grain Cargo Plan Must Match the Surface in the Hold
For bulk grain, a sound departure calculation depends on what is actually loaded: each hold’s fill, grain surface, stowage factor and voyage condition. This explainer connects the grain loading manual to the practical checks made before sailing.
DRI (D) Fines: Plan the Hydrogen-Control Voyage Before Loading
Direct reduced iron (D) fines require more than a moisture certificate. Their cargo schedule links ageing, temperature checks, hydrogen monitoring, ventilation capacity and the voyage route. This guide follows those decisions from stockpile to discharge.
Ballast and Bulk Cargo: Keeping Two Transfer Clocks in Step
An explainer for 14 October 2026 on coordinating cargo transfer with ballast pumping at a bulk berth—and recognizing when cargo work needs to pause.
Scrap in the Hold: Checking the Cargo Stream for Hidden Fire Risks
A bulk scrap declaration describes the intended cargo, but unwanted batteries, drums and oily material can travel with it. A 2025 cargo-hold fire illustrates why screening before loading, observation during transfer and a clear response to suspect material deserve separate attention.
Thirty Degrees, Thirty-Five Degrees: Reading Bulk Cargo Trimming Criteria
An angle of repose helps identify which trimming provisions apply to a non-cohesive solid bulk cargo. This guide separates the cargo’s angle from the finished surface limit, explains the two height thresholds, and clarifies the reference to grain-stowage rules.
Coal Gas Monitoring at Sea: Turning Readings into a Useful Record
A practical guide to coal-cargo gas monitoring: prepare the instrument and sampling points, make readings comparable, and record trends and operating context so that changes can be assessed and escalated promptly.
A Sample Is Only as Useful as Its Route: Planning Bulk Cargo Sampling
A cargo test is only meaningful if the material tested represents the lot shipped. Plan sampling around cargo variability, handling, test purpose and sample custody—not just the moment a certificate is requested.
The Cargo-Hold Bilge System: A Practical Checkpoint for Bulk Voyages
Cargo-hold bilge wells are a small but important part of a bulk carrier’s safety arrangements. This dated explainer outlines how cargo-specific instructions, sound preparation, voyage monitoring and post-discharge checks help keep the drainage system ready to do its job.
Clear Signals, Safer Bulk Operations: A Ship–Shore Communication Guide
A practical communication framework for bulk cargo loading and discharge: establish who is in charge, confirm the operating plan, use closed-loop instructions, and make pauses and restarts explicit.
When a Solid Bulk Cargo Can Behave Like a Liquid: A Practical Guide to Moisture Controls
For cargoes that may liquefy, moisture paperwork is a safety control—not a box-ticking exercise. This dated explainer clarifies the difference between transportable moisture limit and actual moisture content, outlines the evidence required before loading, and explains why sampling and weather changes matter.
Before the Bulk Fixture: Getting Cargo Information Ready
A practical guide to the cargo details that help owners, charterers and operators assess a solid-bulk voyage before loading. Correct identification, timely documentation and attention to cargo-specific hazards can prevent late surprises during fixture planning and execution.