US LNG Quantity Records: Reconcile Liquid Volume and Energy
Reconcile the records before calculating a transport ratio
A US LNG commercial team may receive one record describing liquid volume, another describing energy and a transport proposal expressed as a total charge. Before combining them, establish whether the quantity records describe the same cargo, measurement event and scope. A plausible ratio does not prove that the inputs belong together.
For a Gulf Coast shipment, the immediate buyer question is how to turn inconsistent quantity records into a usable commercial basis. This is a reconciliation task before it is a pricing task. The analyst needs to determine which fields can be matched, which require qualified clarification and which should remain excluded from the comparison until their meaning is known.
EIA explains that converting natural-gas prices between physical and energy units requires the relevant heat content. EIA conversion guidance.
That principle does not supply a universal liquid-LNG conversion. A natural-gas volume field and a liquid-volume field should not be treated as the same physical quantity because both use cubic units. Preserve the full description of each input and obtain the applicable shipment evidence instead of borrowing a convenient average.
Create a quantity crosswalk with explicit boundaries
For each record, capture the cargo or parcel reference, the measurement event, the unit, the physical state described and whether the figure is provisional or final. Then compare those fields before comparing values. Two numbers from different cargo versions can produce an apparently reasonable quotient while still being an invalid pair.
Separate a parcel total from a partial movement. A certificate may relate to one transfer while a commercial worksheet covers several transfers. The analyst should establish the relationship from the records, not assume that similar dates or quantities prove equivalence. If the worksheet contains an aggregate, identify the components that make it up.
GIIGNL's 2021 handbook addresses determination of transferred LNG energy and explicitly identifies itself as a reference, not a standard. GIIGNL handbook.
Qualified parties must establish the applicable measurement result and procedure. The commercial analyst's crosswalk preserves that result and its scope. It should not replace measurement work with a spreadsheet-derived quantity that merely makes an invoice reconciliation appear to balance.
Diagnose an invented scale mismatch
Consider a fictional file with a liquid-volume record of 150,000 cubic meters for a named parcel. A second record states energy of 3,000 in a field labeled thousand MMBtu. The correct interpretation of that stated scale is 3,000,000 MMBtu. These are invented numbers for explaining a data check, not a typical LNG composition or cargo specification.
If an import process drops the word thousand and stores 3,000 MMBtu, the resulting energy-to-volume quotient is 0.02 MMBtu per cubic meter. Preserving the stated scale produces 20 MMBtu per cubic meter. The factor-of-one-thousand difference comes from reading the field label incorrectly, not from a demonstrated physical change in the cargo.
The analyst should correct the import mapping only after verifying the original record and its intended unit. Do not multiply a suspicious value by one thousand simply because the result looks more familiar. An unexpected ratio is a diagnostic prompt; the source field supplies the basis for correction.
Keep the original field alongside the normalized one. A reviewer should see the source value of 3,000, its thousand-MMBtu label and the normalized value of 3,000,000 MMBtu. That makes the correction reproducible without relying on an unexplained number embedded in a formula.
Reconcile split parcels before forming an aggregate
Now consider a separate fictional file covering two components. Component A records 90,000 cubic meters and 1,800,000 MMBtu. Component B records 60,000 cubic meters and 1,260,000 MMBtu. Assume the responsible parties confirm that these components belong in the same commercial aggregate and that their stated bases are compatible.
The aggregate is 150,000 cubic meters and 3,060,000 MMBtu. Dividing total energy by total volume gives 20.4 MMBtu per cubic meter for this invented aggregate. The component ratios are 20 and 21 respectively. Taking their simple average gives 20.5, which does not preserve the unequal component volumes.
Applying that incorrect simple average to 150,000 cubic meters would imply 3,075,000 MMBtu, overstating the stated aggregate energy by 15,000 MMBtu. Summing the compatible quantities first avoids that error. The exercise is an arithmetic reconciliation, not a recommendation to combine physically or contractually incompatible parcels.
If one component uses a different event or unit basis, stop the aggregation and request clarification. A weighted calculation cannot repair incompatible definitions. The relevant question is whether the component records belong in the same total, not merely whether the spreadsheet can add them.
Distinguish a revised quantity from a corrected label
A later record can change the commercial dataset in several ways. It may correct a unit label, replace a provisional quantity with an approved quantity or identify that the earlier record covered only part of the shipment. Each change requires a different explanation. Preserve the reason rather than presenting every revision as a change in cargo energy.
For a label correction, document the normalization rule and confirm that it applies to the affected field. For a revised measurement result, retain the responsible party's updated evidence. For a scope correction, identify the additional or excluded component. This lets a reviewer understand whether commercial conclusions changed because of new information or a data-processing error.
Do not average superseded and replacement records together. They are alternative statements about the same item, not separate cargo contributions. Likewise, duplicate copies from two systems should not enter the aggregate twice merely because they arrived through different interfaces.
Release a commercial basis only after reconciliation
The final quantity summary should show the accepted aggregate, its units, the supporting components and any unresolved exceptions. If an important record remains provisional, label that condition prominently. A transport comparison can then use the stated basis without implying that the analyst independently certified the cargo's measured energy.
Keep the commercial charge separate while the quantity issue is unresolved. A quote can remain a valid total-price observation even when a per-energy presentation cannot yet be supported. This prevents false precision from turning an incomplete quantity file into an apparently definitive unit-cost ranking.
Bring Zeaclub a sample LNG quantity package and the commercial question it needs to support. A proposed reconciliation workflow could flag missing scales, incompatible parcel scopes and duplicate records before the team builds a freight comparison. The objective is a traceable quantity basis for US LNG commercial analysis, with technical measurement judgments remaining with the qualified parties responsible for them.
Sources
- EIA: Natural Gas Price Conversion FAQ, checked October 24, 2026; heat-content requirement only, no published average copied.
- GIIGNL: LNG Custody Transfer Handbook, Sixth Edition, 2021, checked October 24, 2026; primary-authored handbook hosted by a third party, reference purpose only.
Related articles
- 0450: Corpus Christi LNG Offers: Compare the Energy Quantity Behind the Cargo Price
- 0458: US LNG Boil-Off Economics: Separate the Cargo Forecast From the Claim
- 0993: US RoRo Measurement Worksheet: Reconcile Quote and Cargo Bases


