Distinguish nominated time from confirmed movement

A preliminary window, estimated slot and confirmed movement instruction have different reliability. Commercial teams should not order maximum speed on the strength of an unverified message or an indicative planning time.

The decision record should identify who issued the time, what area and direction it covers, whether the ship is accepted, the required reporting point, the allowable arrival range and the next confirmation. If a message comes through an agent or broker, the operator should verify it through the authorised channel.

An ETA should be a range where uncertainty is material. Weather, current, traffic, machinery and route updates can change arrival. Reporting an artificially exact minute may create false coordination and pressure the master to recover small delays through unsafe speed.

The ship should also know the consequence of arriving early. If there is no approved holding area or safe drifting box, early arrival can be worse than a modest delay. Several vessels accelerating toward the same unconfirmed time can produce congestion outside the controlled route.

A confirmed slot does not guarantee passage. The threat picture, route status or ship readiness may change. Speed planning needs a decision point at which the team either accepts the current opportunity, shifts to the next case or moves to a safe fallback.

Optimise early while options are broad

The IMO's just-in-time arrival work shows the value of receiving a reliable requested time early enough for a ship to optimise speed. Although a Hormuz security window is not a port berth timestamp, the operational principle transfers: early, trustworthy information permits a measured speed adjustment instead of a late sprint followed by waiting.

The shore team can model several approach profiles. A base case reaches the reporting point within the confirmed range with a margin for forecast variation. A delayed case identifies the sustainable speed needed after a later departure or revised time. A fallback case shows where and how the ship waits if the opportunity disappears.

Each case should include fuel use, machinery limits, crew preparation, traffic, weather, under-keel clearance and time spent in higher-threat areas. The lowest fuel profile is not necessarily the lowest total-risk profile. Nor is the fastest profile automatically the safest because it reduces exposure time.

Acceleration capability should be realistic. Hull fouling, draft, weather, engine condition, fuel quality and operating limits may prevent the charter-party speed from being reached. The master should report constraints early so coordinators do not build a sequence around an unavailable performance level.

Engines and steering also need thermal and mechanical readiness. A plan that slow steams for economy but cannot deliver rapid manoeuvring when entering the risk area has transferred cost into vulnerability. The machinery team should specify when additional units, generators or systems must be ready.

Treat safe speed as the controlling limit

COLREG Rule 6 requires every vessel to proceed at a safe speed, taking account of prevailing circumstances. The IMO summary also stresses proper lookout and the use of all available means to assess collision risk. A transit slot cannot waive those duties.

Safe speed can be lower than a security-planning speed because of visibility, traffic density, vessel manoeuvrability, background lighting, radar limitations, draft, shallow water or electronic interference. It can also change during the passage. The master must be able to reduce speed without being accused of abandoning the agreed plan.

Higher speed has physical consequences. Stopping distance grows, turning options change, squat can increase in shallow water, and the time available to interpret a false AIS target or conflicting VHF message shrinks. In mixed traffic, a speed differential can force overtaking or compress closest-point-of-approach margins.

Lower speed also has consequences. It can increase time exposed to attack, reduce steering effectiveness below an appropriate threshold, disrupt sequence spacing or make the vessel more vulnerable to boarding. The safe choice is a vessel-specific band with known triggers, not "maximum speed" or "slow steaming" as a slogan.

The passage plan should state minimum effective steering speed, planned range by sector, maximum acceptable squat speed, traffic and visibility limits, and the conditions for departing from the profile. The bridge retains discretion to act under COLREG and emergency procedures.

Pre-agree the response to a missed profile

A ship may fall behind because of an engine alarm, current, weather, traffic avoidance or a security event. Trying to recover every lost minute can destabilise the route. The plan should define when the vessel reports a deviation, when a slot must be revalidated and where it can hold or abort.

Closed-loop communication matters. A speed request should be repeated back with units, duration and reference point. The master should state if it is unsafe or technically unavailable. Unclear instructions should not be converted into aggressive engine orders simply because another vessel appears to comply.

The shore team should avoid parallel speed instructions from chartering, operations, agents and security personnel. One authorised channel should consolidate the commercial objective, while the master controls execution. Conflicting chat messages can become a human-factor hazard on the bridge.

If a threat demands evasive action, the pre-planned response should account for traffic, draft and route boundaries. Industry guidance advises early action against certain threats where safe, but does not authorise a blind increase into another ship, mine hazard or shallow water. Emergency manoeuvring remains a judgment under actual conditions.

Price speed without pricing out safety

Faster approach speeds increase bunker consumption and emissions and may create waiting if the slot moves. Slower speeds can save fuel but risk a missed opportunity, longer war-risk exposure or cargo delay. Owners and charterers need a common scenario model.

The model can show fuel and time for each profile, probability ranges for slot change, and the cost of early waiting, late arrival and resequencing. It should separately identify safety limits that are not negotiable. A charterer's willingness to pay for fuel does not expand the vessel's safe-speed envelope.

Contract communications should record the source of the requested time, speed orders, master's constraints, revisions and resulting ETA. Due-despatch and performance questions depend on contract wording, weather and vessel facts. A good record allows later allocation without forcing the bridge to argue legal positions during transit.

A Zeaclub speed-control board can connect verified timing messages to vessel performance, fuel, weather, traffic, draft and machinery readiness. It can show approach, transit and fallback profiles, then flag when a changed time would require speed outside the approved band. It should never issue an autonomous engine command.

The best speed plan reaches the commitment point ready, not merely early. It uses reliable information to optimise the distant approach, respects safe speed in the congested route, and keeps enough propulsion and sea room to respond when security conditions change.

This article distinguishes verified source material from ZeaClub analysis, recommendations, forecasts and hypothetical scenarios.

Sources