US Crude Freight per Barrel: Use the Cargo's Agreed Quantity Basis
Match the freight unit to the sale unit carefully
A US crude exporter comparing a freight quote in dollars per tonne with a product margin in dollars per barrel needs a supported quantity basis. A generic conversion copied from another cargo can alter the apparent freight burden and the decision between offers. The calculation should use the basis applicable to the actual product and transaction, confirmed by the responsible specialists.
This is different from investigating a cargo shortage. The immediate question is how to express transport cost consistently in a commercial model before comparing it with the sale margin. The calculation should not alter custody-transfer records or replace a technical reconciliation. It should show where the input came from and what remains provisional.
API's public description of MPMS Chapter 11.1 addresses temperature and pressure effects on liquid-hydrocarbon density and volume. That scope explains why a commercial quantity comparison should not silently mix measurement bases. API MPMS Chapter 11.1.
Preserve the original quantities and units
Keep the original freight rate, quoted quantity, product price, and sale quantity in their original units. Add a separate conversion step rather than overwriting the source values. This makes it possible to audit the result and identify whether a change came from the freight offer, cargo quantity, or conversion assumption.
State whether the model uses a planned, nominated, measured, or settled quantity. Each has a different purpose. A preliminary freight comparison can use an explicitly provisional assumption, but it should not later be presented as a final settlement calculation without updating the input and confirming the relevant contractual basis.
Also identify minimum or fixed freight obligations. Dividing a total freight bill by expected barrels can be useful for margin analysis, but the resulting average does not change the amount owed under the charter. If the parcel shrinks, the average burden can rise even when the freight rate itself remains unchanged.
A hypothetical tonne-to-barrel comparison
Consider a fictional Gulf crude shipment with freight quoted at $15 per tonne. For illustration only, assume the transaction's confirmed commercial calculation basis is 7.5 barrels per tonne. Dividing fifteen by 7.5 produces a freight burden of $2 per barrel. This assumed factor is invented for the example and must not be used for a real cargo.
Suppose an analyst instead copies a factor of eight barrels per tonne from an unrelated worksheet. The model then shows $1.875 per barrel, understating freight by $0.125 per barrel relative to the example's agreed basis. Across an assumed 600,000 barrels, the apparent margin is overstated by $75,000.
The arithmetic is simple; the input control is the important part. A small-looking difference in the factor can matter commercially because it applies to a large quantity. The desk should resolve the basis before accepting a narrow cargo margin that depends on it.
Now suppose the freight is a fixed total rather than a unit charge. The desk should divide that actual total by the relevant sale quantity for its margin analysis. Applying a per-tonne formula to a fixed obligation would answer a different question. The model needs to reflect the contract structure as well as the units.
Keep physical reconciliation with the right specialists
A disagreement between loading and receiving quantities can require technical investigation, contractual review, or both. The commercial conversion worksheet should not be used to force those figures to agree. Preserve the records and obtain the appropriate specialist explanation of the differences.
The Energy Institute's current HM 64/API MPMS Chapter 17.5 overview describes guidelines for marine cargo quantity reconciliation that complement normal inspection procedures. Its scope reinforces that a commercial margin calculation is not a substitute for inspection and reconciliation. Energy Institute HM 64.
If the specialist review changes the quantity basis relevant to the transaction, update the commercial model transparently. Record the previous assumption, the new basis, and the resulting margin change. That allows management to distinguish a genuine economic change from correction of an earlier calculation error.
Apply the same basis to competing offers
Two freight offers should be compared on consistent cargo assumptions. If one is evaluated using planned tonnes and another using a different barrel estimate, the ranking can reflect the model rather than the offers. Reconcile the assumptions before deciding which quote is cheaper.
The same applies to alternative crude purchases. Different products may have different supported conversion bases and different refinery or customer values. A lower freight burden per barrel does not necessarily make a grade more attractive if its purchase price or accepted value differs. Compare complete cargo economics without assuming physical interchangeability.
Where a required input is unavailable, show the unresolved range or pause the dependent conclusion. Do not select a convenient factor simply to produce a single precise margin. The desk can continue gathering freight terms and other independent information while the quantity basis is confirmed.
Make the calculation reviewable
A practical calculation note should identify the source quantities, the applicable units, the conversion basis, and the contractual freight structure. It should also state whether the result is a screening estimate or a final commercial calculation. This is enough to make the decision understandable without reproducing technical measurement procedures.
Zeaclub welcomes a crude freight enquiry that preserves these distinctions. Include the quoted freight unit and the product-sale unit, along with any specialist-confirmed basis available. The useful question is whether the cargo margin supports the actual transport obligation, rather than whether two numbers can be made to fit the same column.
For the next export comparison, retain the original offer, confirm the relevant quantity basis, and calculate the unit burden separately. Test the result at the quantity the business can actually commit. A supported conversion protects a narrow margin from an avoidable spreadsheet assumption while leaving technical measurement and settlement decisions with the responsible professionals.
Sources
- API MPMS Chapter 11.1 public description. Temperature, pressure, density, and volume-correction scope inspected October 23, 2026; no paid algorithm or technical procedure reproduced.
- Energy Institute HM 64/API MPMS Chapter 17.5. Current July 2025 publication overview inspected October 23, 2026; full standard was not accessed or applied to a real cargo.
Related articles
- 0407: US Crude Freight Offers: Test the Price When Cargo Quantity Changes
- 0438: US Crude Export Arbitrage: Separate the Benchmark Spread From the Cargo Margin
- 0879: US Refinery Utilization Data: Test the Denominator Before Inferring Tanker Demand


