US Caustic Soda Cargoes: Keep Product and Freight Quantity Bases Separate
Identify what each quoted ton measures
Before comparing US Gulf Coast caustic soda offers, determine whether each price applies to the liquid cargo carried, a dry product equivalent, or another expressly defined billing quantity. A freight rate and a product price can both be written per ton while charging against different quantities. Adding those rates without conversion produces a misleading landed cost.
Keep the physical shipment quantity beside the commercial product billing quantity throughout the comparison. Establish concentration, mass units, and the contractual calculation method before converting either rate. This is a commercial reconciliation task, not a recommendation to change cargo concentration or handling arrangements.
Platts' April 2020 clarification distinguished liquid indications from dry-ton assessment units and described normalization for its assessments. That dated explanation supports checking the measurement basis; it does not establish today's price or govern a private sale. Platts measurement clarification.
Write the quantity equation before the price comparison
Start with the cargo description supplied and accepted for the proposed transaction. A label such as caustic soda leaves unanswered questions about grade, concentration, permitted variation, and billing convention. The commercial desk should request the relevant specification and ask how measured quantity and analysis feed into the invoice.
Do not assume that a dry-equivalent figure always means a simple multiplication by the nominal concentration. The agreed sale may specify its own analytical and billing basis. Equally, do not assume that a quotation using tons means metric tons. If the mass unit differs between the product and freight offers, reconcile that difference before evaluating the discount.
OxyChem's handbook includes a separate caustic-soda billing explanation using an analytical basis and a worked invoice. Its presence shows why the seller's billing method deserves explicit review instead of an assumed nominal-concentration shortcut. OxyChem handbook.
For freight, establish whether the charge uses actual loaded liquid mass, a minimum chargeable quantity, a lump sum, or another stated mechanism. The ship transports the physical cargo. That does not dictate how the carrier must price its service, but it explains why a product-equivalent quantity cannot silently replace the freight quantity.
Work through a deliberately simplified comparison
Consider a hypothetical Gulf Coast purchase of 10,000 liquid metric tons. For this example alone, the parties expressly agree to bill the product as 5,000 dry-equivalent metric tons, using an assumed 50 percent mass basis without any analytical adjustment. This simplified agreement is not a statement of universal industry invoicing practice.
Seller A quotes $500 per agreed dry-equivalent ton. The product invoice is therefore $2.5 million. Ocean freight is quoted separately at $60 per liquid metric ton, producing a $600,000 freight cost. Before other costs, the total is $3.1 million.
That total equals $310 per liquid metric ton or $620 per agreed dry-equivalent ton. Both expressions describe the same expenditure. Adding the original rates as $500 plus $60 to report $560 per dry-equivalent ton would understate the comparison because the freight rate was attached to twice as many physical tons.
Now assume Seller B offers the same accepted product and liquid quantity at $305 per liquid metric ton, with equivalent ocean transport included. Its total is $3.05 million, making it $50,000 cheaper on the stated scope. A comparison that looked only at the numbers 500 and 305 would be meaningless because their denominators and inclusions differ.
Suppose B excludes a receiving service that A's complete comparison already includes, and the equivalent service costs $70,000. B's adjusted total becomes $3.12 million, making A cheaper by $20,000. The quantity conversion solved one problem; the scope reconciliation solved another. Neither step can replace the other.
Keep volume out of a mass comparison unless justified
A terminal discussion may use volume while the sale and freight calculations use mass. Avoid entering a convenient generic conversion merely to make the spreadsheet complete. Obtain the applicable product information and agreed measurement basis from the parties responsible for the transaction.
The immediate commercial question is whether the terminal, carrier, and buyer are assessing the same physical parcel. If one offer assumes a volume and another assumes a mass, ask for the basis that reconciles them. Mark the comparison unresolved until the conversion is supported. An apparently precise total is less useful than a clearly identified missing input.
The same discipline applies when a customer requests a fixed quantity of usable product rather than a fixed quantity of solution. A different supplied concentration might change the liquid quantity needed, but that is not permission to substitute the product. Specification acceptance and suitability must be resolved before any revised logistics comparison becomes actionable.
Test invoice changes without rewriting the cargo history
Once shipment measurements and product analysis are available, a final invoice may differ from the planning estimate under the agreed terms. Preserve both quantities and explain the difference. A changed product billing quantity does not automatically imply that the carrier transported a different liquid mass.
Separate measurement adjustments, contractual allowances, and service charges. A lower final product invoice may be offset by an additional logistics cost, or it may simply reflect less billable product. These outcomes have different effects on the buyer's delivered requirement. Evaluate the quantity received alongside the amount paid rather than celebrating a smaller invoice in isolation.
Send a quotation request with intelligible units
A useful enquiry to Zeaclub can state the proposed Gulf Coast origin, destination, accepted grade, liquid shipment quantity, product billing basis, and requested freight scope. Include the supplier's terminology exactly where it affects the calculation, with a plain-language explanation beside it.
Ask each respondent to identify its chargeable quantity and exclusions. Compare complete totals first, then express them on a common unit that answers the buyer's actual question. This approach makes a small freight saving visible without allowing a unit mismatch to overwhelm the economics of the entire caustic soda transaction.
Sources
- Platts caustic soda measurement clarification. Historical assessment-unit explanation, not current pricing; checked October 24, 2026.
- OxyChem caustic soda handbook. Billing-method scope only; checked October 24, 2026.
Related articles
- 0147: Kalama Cargo Statistics: Normalize Short Tons Before Comparing Maritime Markets
- 0125: Portland Soda Ash Exports: Distinguish Direct Transfer from Inventory Available for Loading
- 0505: US Renewable Feedstock Shipping: Price the Material the Buyer Can Use


