LPG is a family, not one interchangeable product
Market headlines often combine propane and butane as LPG. Both can be liquefied for transport and used as fuel or feedstock, but their physical properties, specifications, seasonal value, appliances, storage systems, refinery uses, and petrochemical yields differ.
During the Hormuz shortage, aggregate replacement tonnes could therefore conceal a product mismatch.
What is verified
The IEA defines LPG as liquefied propane, butane, or mixtures of both. It reports Hormuz LPG exports fell about 80% in March 2026 from the 2025 average, creating shortages across cooking and petrochemical markets.
Those figures aggregate products. They do not show that each missing propane or butane grade was replaced.
Qatar sells specification products
QatarEnergy's January 2026 butane specification requires at least 97 liquid-volume percent butanes and limits propane to 2%. It also sets limits for vapor pressure, sulphur, water, olefins, and residues.
That document demonstrates why a buyer cannot treat any LPG cargo as equivalent Qatari butane.
Molecules behave differently
Propane has three carbon atoms and butane four. Their boiling behavior and vapor pressure differ, affecting storage pressure, vaporization, cold-weather performance, blending, and handling.
Commercial substitution must be tested against the receiver's equipment and product standard, not inferred from similar names.
Cooking blends vary by climate
Propane vaporizes more readily in cold conditions, while butane can be suitable in warmer markets and is widely used in household cylinders or blends. National standards and appliance design determine acceptable composition.
A cargo meeting one country's seasonal blend may not meet another market's cylinder specification.
Vapor pressure constrains blending
Adding more propane can raise blend vapor pressure. Storage vessels, cylinders, relief systems, filling plants, transport equipment, and ambient-temperature limits must remain within approved design.
Emergency substitution should never override engineering and regulatory limits.
Energy content is not the only measure
Buyers may compare heating value per tonne, but vaporization, appliance pressure, combustion quality, cylinder fill, safety, and distribution practices also matter. A theoretically equivalent energy quantity can perform differently at the burner.
Delivered service, not gross tonnes, is the relevant outcome.
Odorization and quality control matter
Consumer LPG requires reliable leak detection and quality management. Water, sulphur compounds, residues, and contaminants can affect equipment, corrosion, regulators, valves, and customer safety.
Replacement origin changes require sampling, testing, certificates, and receiving-terminal acceptance.
Petrochemical crackers value yield
Propane can feed steam crackers or propane-dehydrogenation units to make propylene and other products. Normal butane can support petrochemical cracking and butadiene-related chains, while isobutane has different refinery and chemical uses.
Substituting molecules changes product yields, furnace settings, economics, and downstream balances.
PDH plants need propane
An on-purpose propane dehydrogenation unit is designed around propane feed. Butane cannot simply enter at the same rate and produce the intended propylene output.
When propane is scarce, the plant may reduce runs even if aggregate LPG supply appears adequate.
Refineries value butanes differently
Normal butane can enter gasoline blending under seasonal vapor-pressure limits or be converted to isobutane. Isobutane supports alkylate production. These uses respond to gasoline specifications and refinery configuration.
Replacing refinery butane with propane may be technically or economically unsuitable.
Storage tanks may be dedicated
Terminals can segregate propane, butane, and mixtures in dedicated tanks because quality and pressure requirements differ. A buyer with empty butane capacity may not have compatible propane space or downstream connections.
Aggregate terminal capacity overstates the usable capacity for a particular grade.
Ships need suitable tank condition
Gas carriers manage cargo temperature, pressure, prior cargo, heel, contamination risk, reliquefaction, and loading limits. A vessel nominally available for LPG still needs product and terminal approval.
Last cargo and cleaning requirements can decide whether it meets the laycan.
Partial substitution requires blending control
A marketer may blend propane and butane to meet local LPG specifications. The calculation must account for each component's certified composition, vapor pressure, density, contaminants, temperature, and final product limits.
Blending is a controlled manufacturing step, not informal volume averaging.
A hypothetical replacement error
Assume a buyer loses a 40,000-tonne butane cargo and purchases the same mass of propane. Its filling plant cannot accept the vapor pressure under local summer rules, so the cargo must be redirected or blended elsewhere.
This is hypothetical, not a report of an actual 2026 trade.
Cargoes can be commercially stranded
A technically sound propane cargo may arrive where the buyer needs butane, lacks tank space, or cannot change appliance and distribution specifications. The ship then faces waiting, diversion, or resale.
Commodity scarcity does not guarantee that every available LPG parcel has a usable home.
Price assessments need grade clarity
A reported LPG price may refer to propane, butane, a posted mix, a particular delivery basis, or a regional benchmark. Comparing unmatched assessments can create a false arbitrage.
Traders should normalize product, quality, timing, location, freight, and currency.
Owners need accurate nominations
Owners need the correct product name, specification, quantity, temperature, terminal, and handling requirements before accepting a fixture. Late grade changes can affect tank preparation and approvals.
The charter should allocate delay and cost if the nominated replacement product changes.
Charterers need end-use confirmation
Before buying replacement LPG, charterers should confirm whether the customer needs cooking blend, PDH propane, cracker feed, refinery butane, autogas, or another grade. They should verify storage and blending capability.
The cheapest tonne can be the most expensive unusable cargo.
Brokers should quote the right submarket
Gas-ship brokers should distinguish propane, butane, mixed LPG, petrochemical gases, refrigerated or pressurized transport, parcel size, and tank requirements. A position list without product suitability is incomplete.
Freight comparables should reflect the actual cargo and preparation.
Insurers follow quality and pressure
Product misdeclaration, contamination, off-specification delivery, excess pressure, and unsuitable storage can produce cargo, liability, delay, and safety claims. Coverage depends on wording and causation.
Underwriters need evidence of testing, compatibility, procedures, and contractual allocation.
Traders should preserve optional blending
Access to segregated storage, multiple origins, blending facilities, and flexible customers can turn component imbalance into saleable product. The option has costs and physical limits.
Paper exposure alone cannot correct a molecule or tank mismatch.
Forecasts remain conditional
If Hormuz exports recover, regional propane and butane balances may normalize at different speeds depending on plant output and inventories. Persistent disruption could widen component spreads and encourage alternative feedstocks, blending changes, or demand reduction.
These are conditional market effects, not product-price forecasts.
The ZeaClub view
The 2026 LPG shock proved that aggregate barrels are a poor measure of usable replacement supply. Propane, normal butane, isobutane, and mixed LPG serve different appliances, storage systems, refineries, and chemical plants.
Owners should insist on accurate cargo nominations. Charterers should start with end use and specification. Brokers should match ships to the actual grade. Insurers should scrutinize pressure, quality, and procedures. Traders should value segregated storage and blending rights. Governments should prioritize safe household fuel standards. The replacement question is never only how many tonnes are available; it is whether the right molecules, in the right specification, can reach equipment designed to receive and use them.
This article distinguishes verified source material from ZeaClub analysis, recommendations, forecasts and hypothetical scenarios.
Sources
- QatarEnergy, Butane Specifications, January 2026Accessed 2026-11-19
- US EIA, Uses of Hydrocarbon Gas LiquidsAccessed 2026-11-19
- US EIA, Transporting and Storing Hydrocarbon Gas LiquidsAccessed 2026-11-19
- IEA, Energy Crisis Threatens the World's Most Vulnerable as Cooking Fuel Shortages GrowAccessed 2026-11-19
- IEA, Sheltering From Oil Shocks: Cooking FuelsAccessed 2026-11-19